Navigation¶

The filter is located behind the glovebox. there are 9 screws and 1 clip that hold it in. The clip is to the right of the glove box on the side. Below is a picture showing the location of the screws.

Screw location image

There are also 2 screws under the dash.

Screw on drivers side image

Screw on passenger side image

Remove Glove Box¶

Once you have removed the screws and clip you should be able to remove the glove box like the image below.

Glove box remove image

There is a harness that might get in the way, unplug it.

Harness image

==The Filter Cover=

Now the filter cover should be exposed.

Filter cover image

Remove the filter cover so that you can pull out the filter.

Filter cover off image

Remove Dirty Filter¶

Pull out the dirty filter, it should look like the one below.

Dirty filter image

New Filter¶

Replace the filter with the a new one.

New filter image

Replace the filter cover

Replace the glove box and screws.

Plug in the harness.

You are done.

References¶

http://www.iwsti.com/forums/how-install/49232-change-your-cabin-air-filter-how.html

	Name	Size
	cover.jpg	57.89 KB
	dashapart.jpg	67.44 KB
	driverssidescrew.jpg	64.07 KB
	filterin.jpg	53.42 KB
	Gloveboxscrews.jpg	43.67 KB
	harnessintheway.jpg	54.94 KB
	newfilter.jpg	46.51 KB
	oldfilter.jpg	97.96 KB
	passsidescrew.jpg	63.61 KB

Please use care and common sense when working on your car. Experience and proper tools are always required when performing maintenance on your vehicle. Any instructions or definitions of car repair on this site are to be followed at your own risk. If you have questions or concerns about a procedure, please consult a professional before doing the work. WikiAuto is not responsible for damage or injury caused by following instructions on this site.